Radio.
Manual tuning.
1.Nazhmte button a few times SHIFT + BAND on the remote control or TUNER / BAND, to select a range. This system has several frequencies: FM, MW, LW.
Also, to select the desired frequency, press the button several times FUNCTION.
2.Click  DOWN or  UP, to tune the frequency.
"TUNE" is displayed when a station is set up.

Automatic station search.
Hold  DOWN or  UP button until until the radio starts to search for a station. Searching stops when a station is found.
To stop automatic search, click one of the buttons.
• Auto Search does not accept a weak station signal.

Setting up stations in memory.
Presetting radio frequencies in the memory will allow you to further customize the tuner directly to the desired station.

Manual tuning.
1. Press TUNER / BAND to select a range.
2. Click  DOWN or  UP for infusion to the desired station.
3. Save the frequency of the station in memory by pressing ▐ ▐ SET.
In this case, the display will flash the number next memory cell, starting with 1.
4. To install the five frequencies of other stations, repeat steps 1 to 3.
Note:
When you try to memorize the setting of more than 32 stations, appears in the display FULL.

Tuning in to stations from memory.
1. Press TUNER / BAND to select a range.
2. Hold down the RT for 4 seconds to as long as is displayed AUTO PRESET.
3. Click ▐ ▐ SET.
 If ▐ ▐ SET button is not pressed within 4 seconds, the automatic setup will not be activated. The indicator lights up tuning and setup will begin with the frequency of FM.
The frequency and station number (starting with 1) appear on the screen if they are put into memory. The display returns to the first station after the scan.
• The display shows the MW or LW if the station is not available.

P.13.
Setting up stations.
At the Music Center.
1. Select a range using TUNER BAND.
2. Then repeatedly press the ► PRESET or turn the control dial MULTI JOG.
Each time you press this button is displayed next selected number.

To directly select the preset number from the remote control
1. To select a range, press BAND, while holding SHIFT.
2. Press the number buttons to set the number of the order you want the station.
For example, the desired station number 20: press +10, +10, and 0.

Removal of radio stations from memory.
Select the number of stations you wish to delete. Then press CLEAR and within 4 seconds II SET. Programmed numbers for all subsequent stations will be reduced by 1.