DVBViewer Web Interface 1.4.4
-----------------------------

The DVBViewer WebInterface allows you to control, view epg, program timers and stream a TV-Channel. This Program only works with DVBViewer Pro 3.9+. For streaming you need to install VLC from www.videolan.org.


Terms of Use
------------

By using DVBViewer Web Interface you agree to the following terms of use:

DVBViewer Web Interface is provided as a free additional software exclusively for purchasers of DVBViewer Pro. It is only available via download from http://www.dvbviewer.com. Any other kind of distribution or usage violates the copyright of the authors and is prohibited.
Please note: : DVBViewer Web Interface is not port of the official DVBViewer release. Improvements and updates are provided as far as possible. Any claims to support, updates, changes or bug fixes are explicitely excluded for DVBViewer Web Interface, though. You use it at your own risk.

THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OF THIS SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

However, feel free to post suggestions or bug reports in the DVBViewer Forum: http://www.dvbviewer.info/forum/


Installation:
-------------
Unzip the content of the archive into the dvbviewer folder.

How to change the language:
---------------------------
This has to be done after the first start of the Webserver. Currently there are deutsch, english, italiano and danish language files (located in the language subfolder with the rc_ prefix). You can change the language now in the config webpage of the webinterface via webbrowser.


Usage:
------
Start the server. Check the used Port and Network-Interface.

ATTENTION: You may have to adjust the port if you have another webserver running on the default port!!

Interface is the Network-adress the webserver is listening for requests.

127.0.0.1  only connects from the local computer are allowed
0.0.0.0    the webserver will listen on all available network cards.
[Your-IP]  The Webserver will listen on the specified network card.

Attention: Don't use the IP of your DVB-Card (Only technisat *Star users affected) this won't work. The webserver does not interact with the DVB device, only with the DVBViewer.

If you have set up all, activate the webserver.

Now you can open the Internetbrowser of your choice and point it to the IP of the computer running the webserver.

Example:
Your webserver runs on the computer with the IP 192.168.0.10 and you set Port 8080 then http://192.168.0.10:8080 would be the URL to open the page. If you set Port 80 you can drop the Port and only write http://192.168.0.10 .

If all works well you get the login page. The default passwort and User:
User:      admin
Password : admin
You can and should change this with the integrated configurationpage in the webbrowser.

If the DVBViewer is not running you see a page, where you can start the DVBViewer. Just press the button and the DVBViewer starts and the default page is shown automatically.



Changelog:
----------

1.5.0
------------
- Fix: Fixed wrong htmlheader preventing the we interface being used with safari.

- Update: Language files updated.

- Fix: several small enhancements and fixed for the html templates.

- New: The webstreaming has been compltely rewritten. You can now select the streaming on the EPG-Details page or on the recordings page. Yes, you can stream files now ;)
And you can stream to almost any OS where VLC is available. Important on the server PC VLC MUST BE INSTALLED to use this feature.

If you want to stream via Web you have to make sure the selected port is cleared by the firewall and router.
You also have most likely to create new presets which are tailored for your upload bandwidth. Just add up videostream and audiostream bitrate. The presests are saved by pressing the save button.

This is a first implementation. It means there are most likly some rough edges but it works even in this state more reliable and less CPU consuming than the old ASFStreaming.


1.4.4
------------
- Fix: The Web Interface did ignore the usermode.ini settings, resulting in not saving the setup on vista or for users with no rights to the program folder.

- Add Suomi.lng file(thanks @SF100)

- Fix: Chinese language support. All EPG related pages should now show correctly in chinese. No changes in the web pages should be necessary. The charset settings for the webpages are done with the rc_chinese.lng file (it is set to Big5). You need to select the language in the Configuration page.
For now the rc_chinese.lng is simply a copy of the english language file. It does need translation (some of it can simply be copied from the dvbviewer language files, but I didn't know which was the fitting one...).

- Updated lng files.

- Fix: If using favorites as channel source changing the audio track in the channellist in the dvbviewer lead to a no show of the channel in the webinterface.

- Add: On the configuration page you can adjust the shown time interval for the "What's on today" page. 0 means don't use it (old behavior).

- Add: In the templates for the pages Programs, EPG Search, What's on today and What's on now there are three new(old) tags: {recurl}, {subtitlelong} and {epgdetail} .

- Add: On the recordings page you can now do basic database functions (refresh and delete orphans).

- Fix: The keypresses on the remote control page did cause a unnessecary reload of the whole page, which could cause freezing of the dvbviewer, if keys were pressed fast enough.

- New: You can define a guest account with limited rights. To enable it and set the password see the web configuration page. If the security is disabled (no password for admin account) the guest account does NOT work.

- New: A Mobile Webinterface. http://[youradress]/mobil/ shows you a reduced version of the web pages. Tested with Blackberry(Simulator) and Opera Mini. NO streaming!

- Update: updated the italian language file (thanks @gioxy).

- Fix: DVB-S and DVB-C channels do under certain circumstances collide resulting in the non display of epgdata for some channels.


1.4.2.1
-----
- Fix: The password protection did not work.
- Add: updated the language files (italiano + dansk).
- Change: Missing translations will be replaced with the english text.


1.4.2
-----
- Optimized the Webpages. Details, Recording and IMDB removed. These functions now only can be reached via the detail window.
- The Timerprogramming page is now a popup window. It can be disabled on the configuration page.
- The Popup windows are now centered on the screen and will be brought to the foreground if needed. They are also bigger and have scrollbars now.
- New page: EPG Search. Search in the EPG with several userdefined criterias. (Hint: leaving the search phrase empty and selecting only a genre, lists all entries for this genre (works not for all and none)).
- The Teletext page can now be reached via the remotecontrol onthe right side.
- Optimized: The Datageneration for the webpages has been highly optimzed/speedup and has now also a lower memory consumption.
- Changed: The images\logos folder of the DVBViewer installation is now used for the TV-Logos. You can change the folder in the HTTPServer.ini.


1.2
-----
- Updated the channel and epg data to match the current DVBViewer Pro Beta.
- You can now configure if only radio, tv or both channeltypes are shown in the overview pages.
- The webserver now obeys the "exclude from EPG" from the DVBViewer channeleditor. These channels will not be shown in the overviews.
- reworked ASF-Streaming plugin should support h264 (even if it's completely silly ;) ). The stream will be not automatically continued after channelswitching you have to reload the page.


1.1.3
-----
- Added language selection to webinterface.
- Setting the password to empty disables the password check. Use at your own risk!
- Several small changes to the webpages. A click on the title now opens the EPG-Details and not imdb.
- update of the ASF-Streaming plugin.

1.1.2 Beta
-----
- Fixed a problem in the epg channel list if a channel without epg is tuned in the DVBViewer.
- Improved speed of daylist, what's now and epg search, users with a lot of channels and duplicates (like myself) will profit most of it.
- Changed channellogo search, works much faster now.
- Fixed missing date field in the epg-search display.
- Added a start time in the epg what's now, to display only data from this time to the day end. If left empty the current time is used.
- Added lngfrom to the language file (deutsch + english).

1.1.1 Beta
-----
- Fix wrong channel saved in timer add when using favourites.
- Merged Gibman's enhancements into the default webskin. Thanks to gibman and also benson for their work and help.
- Danish language file updated. Thanks to gibman.

1.1 Beta
-----
- The position of the window is now saved, on first time start the window has the windows default position.
- Integrated a EPG-Search:
  I reworked the What's Today page quite a bit. You now can search/display the EPG by different timesettings and you can search the EPG for keywords. The search is a simple contains search, so "Tages" would result in Tagesschau, Tagestheme and [dt.] Stdtetages etc. I'm thinking of a regular expression search possibility, but I have to see how this would work...
  I also updated the lng files for englisch and deutsch.
  Thanks to gibman again, I stole a little bit of code from his suggestion for the EPG-Search, maybe he is willing to make the (fast made) page a little bit nicer.


1.0.6
-----
- Fixed several problems regarding the use of the favourites as channellist.

1.0.5
------
- Fixed the channellogo tag to the template engine (the epg daylist and the epg list now can use the logo tag). (ID: {channellogo} ). It delivers the logo filename only, no path. If no logo is found a file named "no_logo" is searched and if available used. The What's now page is modified to show the channellogos if available (thanks to gibman). A no_logo (empty image) is in the web/logos folder. Please copy the logos from the DVBViewer logo folder into the web/logos folder.
- Added a configuration option to switch between favorites and channellist display.
- Updated the deutsch and english language files for the above changes.
- Fixed a bug, not showing the correct channel when editing an existing timer.
- Changed the behaviour of the EPG List. If a channel is tuned in the DVBViewer it shows automatically shows the epg for the current channel.


1.0.3
------
- Fixed a bug with the teletext not showing, introduced with the last version.
- Reworked detection and starting of the DVBViewer a little bit.
- Added Single instance detection. Only one webserver can be active.
- Added the channellogo tag to the template engine. (ID: {channellogo} ). It delivers the logo filenmae only, no path. If no logo is found a file named "no_logo" is searched and if available used.
- Added an option to show the favorites instead of the channellist. For now you have to set it manually in the "HTTPServer.ini" file. Create in section [General] a key:
UseFav=1
1 - use Favorites, 0 - normal channellist. In some pages the whole channellist is show, this is on purpose (Remotecontrol, timers-new and add).
- Some Code cleanups.


1.0.2
------
- Fixed a bug in the timer section, making timers unreadable, when adding via webpage.
- Added all internal data properties as global variables to the template engine. You can now modify your html-pages to show the current channelname, epg etc. Since the values are dynamic set by the DVBViewer, not all properties are always available.
To get a list of the properties please use the properties.html in the experimental folder (There is also a example fb.hmtl showing the current channel and epg). Copy the properties.html into the webfolder and call it manually (ex: http://YOUR-IP/properties.html).


1.0
----
- Added start minimized option.
- The webroot now can be changed and is saved into the ini.
- Changed the base libraries to the same the dvbserver uses (for future development important).

Changelog ASFStreaming:
-----------------------
- Added more profiles.


Nutzungsbedingungen
-------------------

Mit der Benutzung des DVBViewer Web Interface stimmen Sie folgenden Bedingungen zu:

DVBViewerWeb Interface steht als zustzliche kostenlose Software exklusiv Kufern des DVBViewer Pro zur Verfgung. Sie ist ausschlielich als Download von http://www.dvbviewer.com erhltlich. Jede andere Art der Nutzung oder Verbreitung verletzt das Urheberrecht der Autoren.
Bitte beachten Sie, dass es sich bei dem DVBViewer Web Interface nicht um ein offizielles Bestandteil des DVBViewer-Release handelt. Verbesserungen und neue Versionen werden nach Mglichkeit zur Verfgung gestellt. Jegliche Ansprche auf Updates, Support oder Fehlerbeseitigung sind jedoch speziell fr den DVBViewer Web Interface explizit ausgeschlossen. Die Benutzung erfolgt auf eigenes Risiko.

DIESE SOFTWARE WIRD 'SO WIE SIE IST' ZUR VERFGUNG GESTELLT. DURCH DEN ANBIETER WERDEN WEDER EXPLIZIT NOCH IMPLIZIT GARANTIEN BERNOMMEN, AUCH NICHT DAFR, DASS SICH DIE SOFTWARE FR EINEN BESTIMMTEN ZWECK EIGNET. FR ETWAIGE SCHDEN AN HARD- UND SOFTWARE SOWIE JEGLICHEN DATENVERLUST UND ALLE SICH DARAUS FR DEN ANWENDER ERGEBENDEN FOLGEN UND ETWAIGE MATERIELLE ODER IMMATERIELLE SCHDEN ODER VERLUSTE WERDEN KEINERLEI GARANTIEN BERNOMMEN! AUF DIE NOTWENDIGKEIT DER DATENSICHERUNGEN VOR DEM EINSATZ DIESER SOFTWARE WIRD AUSDRCKLICH HINGEWIESEN.

Verbesserungsvorschlge oder Fehlerberichte werden gerne im DVBViewer Forum entgegengenommen: http://www.dvbviewer.com/forum/

--------------------------------------------------------------------------------
DVBViewer Web Interface contains...

The FastMM Memory Management Unit that can be obtained from
http://sourceforge.net/projects/fastmm/

The FastCode.Libraries which can be obtained from
http://fastcode.sourceforge.net/
--------------------------------------------------------------------------------